Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Thanks
By:Jimmy
Date: 10/9/2000, 3:37 pm
In Response To: Anchor point placement for internal bungee hatches (Jimmy)

Thanks for everyone's input. The anchor points are now in place and the epoxy is curing. I put them about 2.5" below the sheer clamps which puts them close to half way down the side panels. I hope this works well. Thanks again.

Jimmy

Messages In This Thread

Anchor point placement for internal bungee hatches
Jimmy -- 10/8/2000, 11:22 pm
Thanks
Jimmy -- 10/9/2000, 3:37 pm
Re: Anchor point placement for internal bungee hat
peter czerpak -- 10/9/2000, 3:04 pm
Re: Anchor point placement for internal bungee hat
Dave E -- 10/9/2000, 10:09 am
Re: Anchor point placement for internal bungee hat *Pic*
Ross Leidy -- 10/9/2000, 8:40 am
Re: Anchor point placement for internal bungee hat
Andrew Eddy -- 10/9/2000, 12:14 am