Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: help w/ offsets
By:Ronnie
Date: 10/10/2000, 12:14 pm
In Response To: help w/ offsets (T-bone)

The numbers are in hundreths of an inch. 24.19 = 24-3/16 inches and 24.56 = 24-9/16 inches, rounded off. You will have to get a fraction/decimal conversion chart. Round off the numbers to the nearest fraction. There are some free ones on the web or you can find them at a lot of supply houses for free.

PS Don't type in captial letters. On a bullitin board, that is shouting and some won't answer you. Good luck on your yak.

Messages In This Thread

help w/ offsets
T-bone -- 10/10/2000, 10:55 am
Re: help w/ offsets
Chris Menard -- 10/10/2000, 1:14 pm
Re: help w/ offsets
Ronnie -- 10/10/2000, 12:14 pm
Or...
Dale Frolander -- 10/10/2000, 1:05 pm
Re: Or...
Robert Gardner -- 10/10/2000, 10:42 pm
Re: Or...
Jonathan Hirsch -- 10/10/2000, 6:25 pm
Re: Or...
Dale Frolander -- 10/11/2000, 2:31 am
Re: Or...
Tony -- 10/12/2000, 4:31 pm
Re: Darn you mechanical types :)
Spidey -- 10/11/2000, 10:40 pm
Re: Darn you mechanical types :)
Shawn Baker -- 10/13/2000, 1:48 pm
New/Old Math revisited . . .
Spidey -- 10/13/2000, 5:54 pm
11959.9 I'll mail you my "convert" program spidey *NM*
Dale Frolander -- 10/12/2000, 1:45 am
Re: Or...
Jonathan Hirsch -- 10/11/2000, 2:45 am
Great
Dale Frolander -- 10/11/2000, 9:22 pm