Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Post cure at high temp.
By:Jonathan Hirsch
Date: 10/20/2000, 1:15 am
Date: 10/20/2000, 1:15 am
Has anyone here tried post cure finishing at high temperature.
An info sheet I have for epoxy says that this will increase the general toughness of the epoxy. It recommends temperatures up to 50DegC.
I have seen this web site by Ray Jardine. He made an autoclave out of cardboard boxes!.
Messages In This Thread
- Post cure at high temp.
Jonathan Hirsch -- 10/20/2000, 1:15 am- Re: Post cure at high temp.
Paul C -- 10/20/2000, 4:01 pm- Re: Post cure at high temp.
Tapio Manner -- 10/20/2000, 9:54 am- Re: Post cure at high temp.
Ian Johnston -- 10/20/2000, 3:56 am - Re: Post cure at high temp.
- Re: Post cure at high temp.
