Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Stripping with 1/8" plywood.
By:John Monfoe
Date: 10/22/2000, 7:03 am
Date: 10/22/2000, 7:03 am
Hi,
I'm sure this is a really dumb question but I need to get it out of my thinking. 1/8" Luaun Plywood isn't used for stripping because when sanding the haul, you would sand into the next layer of lamination on the joints and probably sand right through the wood, right?
John
Messages In This Thread
- Stripping with 1/8" plywood.
John Monfoe -- 10/22/2000, 7:03 am- Re: Stripping with 1/8" plywood.
Rehd -- 10/22/2000, 12:25 pm- Re: Stripping with 1/8" plywood.
John Monfoe -- 10/23/2000, 3:42 am
- Re: Stripping with 1/8" plywood.
Roger Nuffer -- 10/22/2000, 11:53 am - Re: Stripping with 1/8" plywood.
- Re: Stripping with 1/8" plywood.
