Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Wood
By:Tom
Date: 10/30/2000, 8:35 pm

I called the lumberyard and they stated that Western Red Cedar was $.69 ft., Clear pine is $1.05 ft. and they also have spruce very light colored and some fairly knot free pieces its $.49 ft. This is for 1x6's. are these prices ok. and is spruce ok for stripping.

Messages In This Thread

Wood
Tom -- 10/30/2000, 8:35 pm
Re: Large dimensoned rough cut
Dave Houser -- 11/1/2000, 12:08 am
Re: Large dimensoned rough cut
John Monfoe -- 11/1/2000, 4:35 am
Re: Large dimensoned rough cut
Shawn Baker -- 11/3/2000, 11:57 am
Re: Large dimensoned rough cut
John Monfoe -- 11/4/2000, 3:26 am
Re: Large dimensoned rough cut--UPDATE
John Monfoe -- 11/8/2000, 5:09 am
Re: He's going for it!
Shawn Baker -- 11/4/2000, 9:29 am
Re: He's going for it!
Roger Nuffer -- 11/4/2000, 11:16 am
Re: He's going for it! *Pic*
Bill Boyd -- 11/5/2000, 4:23 pm
Re: He's going for it!
Don Beale -- 11/5/2000, 12:19 pm
Re: Wood
John Monfoe -- 10/31/2000, 3:43 am
Re: Wood
Paul G. Jacobson -- 11/1/2000, 1:41 am
Re: Wood
Rehd -- 11/1/2000, 8:54 am
short strips
Jim Eisenmenger -- 10/31/2000, 2:14 pm
Re: Wood
Paul G. Jacobson -- 10/30/2000, 11:03 pm