Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Seat Shape *Pic*
By:Shawn Baker
Date: 11/20/2000, 2:58 pm

Hey Spidey,

It looks like your "seat pan" is a bit too short. (front to back) What I mean by this is that it doesn't look like it will provide enough support under your thighs--the front edge also looks a bit "sharp" which could cut off circulation where your thigh transitions from seat support to free floating. Then again, it might just be the angle from which the photo was taken. If you're going to fabric cover it, it wouldn't be hard to camouflage the foam joint.

As far as fabric covering, I was able to use some 6 oz. muslin (looks like thin canvas) in the layup for my glass seat. I only had to cut two 4" long darts to make a flat sheet cover the very curved glass form. Fabrics "move" just like glass does to conform to a contoured surface. If you're using a woven fabric, wet it down well (maybe use some Downey as well) and smooth it to fit your surface. Let it dry overnight, and then glue the dry fabric to the dry seat. Knit fabrics like lycra should have no problem conforming to the seat.

Messages In This Thread

Can We Discuss Carved Minicell Seats? *Pic*
Spidey -- 11/19/2000, 10:04 pm
Re: Can We Discuss Carved Minicell Seats?
Kathy Garlinghouse -- 11/21/2000, 1:20 am
Re: Can We Discuss Carved Minicell Seats?
Spidey -- 11/21/2000, 11:42 pm
Re: Can We Discuss Carved Minicell Seats?
Larry C. -- 11/20/2000, 10:07 pm
Re: Can We Discuss Carved Minicell Seats?
Spidey -- 11/20/2000, 10:29 pm
Re: Can We Discuss Carved Minicell Seats?
Ken Rasmussen -- 11/21/2000, 12:50 am
Re: Can We Discuss Carved Minicell Seats?
Larry C. -- 11/21/2000, 12:17 pm
Re: Ken's article
Shawn Baker -- 11/21/2000, 8:58 pm
Re: Seat Shape *Pic*
Shawn Baker -- 11/20/2000, 2:58 pm
Re: Shawn + Nick
Spidey -- 11/20/2000, 7:46 pm
Re: Sounds like you've got it.
Shawn Baker -- 11/21/2000, 11:16 am
Re: Sounds like you've got it.
Spidey -- 11/21/2000, 12:30 pm
Let's Try This Again :) S, N, & E
Spidey -- 11/20/2000, 8:06 pm
Re: Let's Try This Again :) S, N, & E
Nick Schade - Guillemot Kayaks -- 11/21/2000, 10:21 am
Re: Seat Dimensions *Pic*
Joe Greenley -- 11/20/2000, 9:20 pm
Re: Seat Dimensions
Spidey -- 11/20/2000, 9:49 pm
Re: Seat shape
Mike Hanks -- 11/20/2000, 8:43 pm
Re: Seat shape
Spidey -- 11/20/2000, 10:04 pm
Re: Seat shape
Richard Boyle -- 11/20/2000, 10:38 pm
Re: Seat shape
Spidey -- 11/20/2000, 11:04 pm
Re: Seat Shape
Nick Schade - Guillemot Kayaks -- 11/20/2000, 5:00 pm
Re: Seat Shape
eric schade (shearwater boats) -- 11/20/2000, 6:05 pm
Re: Wedge
Shawn Baker -- 11/20/2000, 5:56 pm
Me too!
Kent LeBoutillier -- 11/21/2000, 6:20 am
You can cover it in lycra.
.tim -- 11/20/2000, 1:01 pm
Re: You can cover it in lycra.
Spidey -- 11/20/2000, 8:13 pm
Burn it! ; )
Jerry Siegel -- 11/20/2000, 11:28 am
Re: I Did! :)
Spidey -- 11/20/2000, 1:40 pm
Can you sand it and coat again?
Brian Nystrom -- 11/21/2000, 12:45 pm
Re: Can you sand it and coat again?
Spidey -- 11/21/2000, 12:57 pm
Re: Can you sand it and coat again?
Jim Goecks -- 11/21/2000, 1:45 pm
Re: Burn it! ; )
Spidey -- 11/20/2000, 12:09 pm
Re: Can We Discuss Carved Minicell Seats?
Chris Casazza -- 11/20/2000, 11:19 am
Re: Can We Discuss Carved Minicell Seats?
Spidey -- 11/20/2000, 12:00 pm
Another thought on fiberglass lay-up
Jim Eisenmenger -- 11/20/2000, 4:51 pm
Re: Another thought on fiberglass lay-up
Spidey -- 11/20/2000, 10:14 pm
Re: Another thought on fiberglass lay-up
peter czerpak -- 11/21/2000, 8:28 am
Re: Another thought on fiberglass lay-up
Jim Eisenmenger -- 11/21/2000, 8:03 am
Re: Can We Discuss Carved Minicell Seats?
Chris Casazza -- 11/20/2000, 12:08 pm
Re: spray-on rubber coating
Dave E -- 11/20/2000, 10:22 am
Re: spray-on rubber coating
Spidey -- 11/20/2000, 11:46 am
Re: Can We Discuss Carved Minicell Seats?
Gini L. -- 11/19/2000, 11:44 pm
Re: Can We Discuss Carved Minicell Seats?
Spidey -- 11/20/2000, 12:09 am
Re: Can We Discuss Carved Minicell Seats?
Nick Schade - Guillemot Kayaks -- 11/20/2000, 9:39 am
Re: Can We Discuss Carved Minicell Seats?
Gini L. -- 11/20/2000, 10:58 pm
Re: Can We Discuss Carved Minicell Seats?
Spidey -- 11/20/2000, 1:32 pm
Vinyl?
Tom Tieman -- 11/20/2000, 6:24 pm
Re: Can We Discuss Carved Minicell Seats?
Grant Glazer -- 11/20/2000, 12:32 pm
Re: Can We Discuss Carved Minicell Seats?
John Monfoe -- 11/20/2000, 4:24 am
Re: Buoyancy
Shawn Baker -- 11/20/2000, 3:07 pm