Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Cutting strip
By:Chris Casazza
Date: 12/6/2000, 2:49 pm
In Response To: Confusion Particulates Dissipate!!! (Bob Deutsch)

Since you are cutting strips this weekend, I recommend running the strips through a thickness planer, if you have access to one. It will make your stripping and fairing much easier. I cut my strips 5/16" and took a little less than a 1/16" off each side.

Messages In This Thread

Confusion re: Respirators
Bob Deutsch -- 12/3/2000, 7:38 pm
Confusion Particulates Dissipate!!!
Bob Deutsch -- 12/6/2000, 2:25 pm
Re: Cutting strip
Chris Casazza -- 12/6/2000, 2:49 pm
Re: Cutting strip
Bob Deutsch -- 12/6/2000, 3:56 pm
Re: Cutting strip
Chris Casazza -- 12/6/2000, 4:39 pm
Re: Cutting strip
Bob Deutsch -- 12/6/2000, 4:46 pm
Re: Cutting strip
Chris Casazza -- 12/6/2000, 4:56 pm
Re: Cutting strip
Bob Deutsch -- 12/6/2000, 11:00 pm
Re: Cutting strip
Ben Staley -- 12/6/2000, 4:16 pm
Re: Confusion re: Respirators
Kent LeBoutillier -- 12/4/2000, 6:21 am
Re: Confusion re: Respirators
Mike Worthan -- 12/4/2000, 7:41 am
Re: Confusion re: Respirators
Bob Deutsch -- 12/4/2000, 8:29 am
Re: Confusion re: Respirators
Ed -- 12/4/2000, 5:00 pm
Re: Confusion re: Respirators
Kent LeBoutillier -- 12/5/2000, 6:45 am
Re: Confusion re: Respirators
Ian Johnston -- 12/5/2000, 9:23 pm
Re: Confusion re: Respirators
Brian Nystrom -- 12/6/2000, 10:37 am
Re: Confusion re: Respirators
Ian Johnston -- 12/6/2000, 8:54 pm
Re: Confusion re: Respirators
Sean -- 12/4/2000, 9:03 pm
Re: Confusion re: Respirators
Ian Johnston -- 12/3/2000, 9:48 pm