Raka is thin, so I'll expect that means it will level better; but that unfortunately means that it runs a lot. Not really that bad to deal with if you have the time and patience to watch and catch it before it becomes a problem.

: I want to know if any of you find much difference in the flowing and leveling
: properties of West,MAS and Raka for clear coatings on hulls. I have used
: West 207 with warmed up resin and found it to be slightly rough when
: sanded with the long board.I know that epoxy does not level like paint and
: I am trying to save some of the hand sanding of the epoxy. I have no
: trouble with wet-out or cure time. thanks, Paul Sylvester