Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: stressed glass - white spots
By:Erez
Date: 2/5/2001, 12:21 pm
In Response To: stressed glass - white spots (steve pollack)

you have to sand the area down to the glass, & then when the glass
is exposed, wet it with epoxy & the white marks should disapear immediately.

Erez

: Using excessive force during separation of hull and deck has caused some
: white marks on the edge of the hull (stressed glass).
: Any one have any suggestions as to how to get rid of these marks. The marks
: are on the edge of the hull about 1/2 inch down. Maybe i'll sand the glass
: off in those spots before I put the seam tape on the outside.
: Any suggestions would be helpfull.
: Thanks - steve pollack

Messages In This Thread

stressed glass - white spots
steve pollack -- 2/4/2001, 3:33 pm
Re: stressed glass - white spots
Erez -- 2/5/2001, 12:21 pm