Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Stainless Steel Deck Fitting Model Pictures
By:Andreas Albat
Date: 2/19/2001, 7:43 pm
In Response To: The Schade,e Goltz Fitting (1of 2) *Pic* (mike allen --->)

Hi everyone,

Attached is the link to a couple of pictures for the model of the stainless steel fitting. This particular fitting is designed for 3/16 bungees, i.e. the slot is only 3/16 wide. The pin is inserted after the machining and slightly expanded for a press fit. It will be glued in from the inside of the deck with thickened epoxy and a fillet to provide a smooth transition to the deck.

Andreas

http://albums.photopoint.com/j/AlbumIndex?u=1539444&a=11667095

Messages In This Thread

The Schade,e Goltz Fitting (1of 2) *Pic*
mike allen ---> -- 2/17/2001, 1:52 am
Stainless Steel Deck Fitting Model Pictures
Andreas Albat -- 2/19/2001, 7:43 pm
very nice
mike allen ---> -- 2/19/2001, 8:14 pm
Stainless Steel fittings
Andreas Albat -- 2/19/2001, 12:23 pm
Re: The Schade,e Goltz Fitting (1of 2)
Bill Sivori -- 2/19/2001, 9:36 am
Re: Eric's fittings and strength
Dean Trexel -- 2/18/2001, 6:56 pm
Re: another fittings option *Pic*
Erez -- 2/17/2001, 1:05 pm
Re: The Schade,e Goltz Fitting (2of 2) *Pic*
mike allen ---> -- 2/17/2001, 2:19 am
Re: The Schade,e Goltz Fitting (2of 2) *Pic*
Bobby Curtis -- 2/17/2001, 10:25 am
response to all
mike allen ---> -- 2/19/2001, 3:10 pm