: Well,
: I never thought I would get this far but the hull is finally ready for
: glassing. I have one question regarding the temp. While I can get the temp
: up in the garage suitable to glass and know it should be done while
: falling what happen if the temp should drop too low overnight and it
: doesn't quite cure.(Garage doesn't hold temp well overnight) If you then
: raise the temp to finish the cure and warm up for the first fill coat,
: would it cause gas out? I have built a test panel for a bulkhead and hope
: to try glassing this weekend. Thanks

Hey, your boat looks great! Very exciting! That wood will glow once the resin touches it! Show us a picture once you've put on the sealer coat.

Can you just lower your heat instead of totally turning it off? That would help. I have one of those electric oil filled radiator heaters I bought at Home Depot for about $30. I use it to keep the temp from dropping too much in my shop after my wood stove cools down.

Rob