Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: North Star ready for glassing
By:Steve
Date: 2/20/2001, 11:31 am
In Response To: Re: North Star ready for glassing (Rob Macks)

Thanks. I heat the garage via wood heat from the next room but I have to close the door at night or I would freeze us out by morning as it's somewhat drafty in the garage. When I'm working in the garage I have to keep the ol stove stoked up pretty good. How much heat does that radiator heater put out. Might be a reasonable solution to try. Otherwise I'd have to wait till spring which isn't going to work for me. I'm hoping to launch this summer!
: Hey, your boat looks great! Very exciting! That wood will glow once the resin
: touches it! Show us a picture once you've put on the sealer coat.

: Can you just lower your heat instead of totally turning it off? That would
: help. I have one of those electric oil filled radiator heaters I bought at
: Home Depot for about $30. I use it to keep the temp from dropping too much
: in my shop after my wood stove cools down.

: Rob

Messages In This Thread

North Star ready for glassing *Pic*
Steve -- 2/20/2001, 11:03 am
Re: North Star ready for glassing
Arthur -- 2/22/2001, 9:13 pm
Re: North Star ready for glassing
Steve -- 2/22/2001, 9:58 pm
Re: North Star ready for glassing
Arthur -- 2/23/2001, 12:10 am
Re: North Star ready for glassing
Steve -- 2/23/2001, 7:51 am
Re: North Star ready for glassing
Arthur -- 2/23/2001, 3:47 pm
Re: North Star ready for glassing
Steve -- 2/24/2001, 8:00 am
Re: North Star ready for glassing
Arthur -- 2/25/2001, 4:37 am
Re: North Star ready for glassing
Roy Morford -- 2/25/2001, 2:25 pm
Re: North Star ready for glassing
Rob Macks -- 2/25/2001, 3:39 pm
Re: North Star ready for glassing
Rob Macks -- 2/20/2001, 11:17 am
Lineage
Pete Rudie -- 2/20/2001, 5:44 pm
Re: Lineage
Rob Macks -- 2/20/2001, 10:19 pm
Re: North Star ready for glassing
Steve -- 2/20/2001, 11:31 am
Re: North Star ready for glassing
Rob Macks -- 2/20/2001, 12:12 pm
Re: North Star ready for glassing
Erez -- 2/20/2001, 4:20 pm
Re: North Star ready for glassing
Pete Rudie -- 2/20/2001, 11:55 am
Re: North Star ready for glassing
Pete Rudie -- 2/20/2001, 11:11 am