Date: 2/21/2001, 4:42 pm
I used a material sold for that purpose at "west marine".
It it's supposed to be closed cell foam, it is black in color,
about 1/4" thick & it's sticky on one side.
DO NOT USE IT !!
it isn't closed cell ! it's open cell but the cells are so small you cant see them. I only realised it when I had leaks & I started looking & I realised that
lousy material absorbs water.
It's glue doesn't hold !
It costs about 4$
I converted to regular minicell foam, around 1/4" thick.
I already glued it with contact cement but didn't had the chance
to test it.
good luck,
Erez
: Can anyone recomend material type and thickness for sealing hatch on
: a custom bulkhead hatch.
: A source would be great help.
: thanks,
: peter
Messages In This Thread
- hatch gasket material
peter -- 2/21/2001, 11:18 am- Re: hatch gasket material
Erez -- 2/21/2001, 4:42 pm
- Re: hatch gasket material