Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Re: Glass Strands in first coat
By:Jerry Siegel
Date: 3/4/2001, 10:50 am
Date: 3/4/2001, 10:50 am
In Response To: Glass Strands in first coat (Steve)
Steve, Remove the strands now with a scraper. It's quick and easy. I feather before the fill coats. Becareful not to sand into the main glass layer. There will likely be a few divits around your feathering, use the fill coats to fill these.
Messages In This Thread
- Glass Strands in first coat
Steve -- 3/4/2001, 9:10 am- Re: razor blade then scrap
Tony -- 3/5/2001, 1:03 pm- Re: Ditto on the scraper
Mike Hanks -- 3/4/2001, 9:47 pm- Re: Glass Strands in first coat
Jerry Siegel -- 3/4/2001, 10:50 am- Re: Glass Strands in first coat
Steve -- 3/5/2001, 8:05 am
- Re: Ditto on the scraper
- Re: razor blade then scrap
