: The Kevlar provides some triangulation to keep the frame from racking and
: breaking the rib/stringer bonds. This is not an issue in traditional boats
: because the lashed joints have enough give to accomodate some movement
: until the skin puts a halt to the twisting.

Do the lashed joints really move that much?

: If you were using Platt Monfort's 3/8"sq, untwisted stringers, I would
: use the Kevlar to prevent snapping those bonds. However, it looks like you
: have flat stringers that twist to conform to the hull, providing lots of
: bonding area.

Thanks. Hadn't considered this.

: So, to answer your question, I dunno. It sure is nice of you to go ahead and
: test all this out for the rest of us. Meanwhile, I am already jealous of
: your boat.

It's been a fun project even if it has been more involved than I originally planned on. Besides, I'll be able to try out and use the Return design while I'm building the stripper. Kind of like have your cake and eating it too

Bill