: I opened that area up a little before glassing as I couldn't get in there
: either. What should I use, Thickened epoxy or push some glass into the
: joint.
: I was thinking it would be easier to get in there when I turn the hull over
: so I don't have to stand on my head to work there.
: Steve

If you have any voids just fill with thickened epoxy, if not just put a couple coats of resin. If you need to fill a good sized void you can put in some thickened epoxy and then stretch some plastic kitchen wrap through the joint and tape in place to hold the epoxy in place.

In my newer plans sets for the North Star and Shooting Star I make the space between the upper and lower bow larger to make access to sealing easier.

Rob