Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

simple exposure
By:mike allen --->
Date: 3/12/2001, 5:00 pm
In Response To: you could build one (Paul G. Jacobson)

: You can make a large, flat, exposure area from a sheet of 1/4 inch plate
: glass.
: Suspend UV rich halogen bulbs above this for your exposure. Or you can get
: photoflood bulbs from a camera store.

: Some people use a 4 foot flourescent fixture and UV rich bulbs in that.

I bet you could just tape the original to the dining room window, and tape the paper tight right behind and leave in the sunlight for abt 5 or 10 min. direct sunlt would be best for sharpness. hey, prob tape to any vertical surface or wall in the light - don't need a window.

-mick

Messages In This Thread

Time flies when you are on the KBBS. OT
Grant Goltz -- 3/9/2001, 7:22 pm
you could build one
Paul G. Jacobson -- 3/11/2001, 7:36 pm
simple exposure
mike allen ---> -- 3/12/2001, 5:00 pm
Re: you could build one. Ok, send the info
Grant Goltz -- 3/11/2001, 10:25 pm
Re: blueprint machine OT
Mike Hanks -- 3/9/2001, 7:42 pm