: through-slots can only run a few inches before haveing to stop. You would
: have to have solid sections somewhere and that means you can't put a clamp
: in those spots. Whereas, with the 3/4" plywood, the 1/4" x
: 5/16" slot can run all the way around and still be strong enough to
: hold the strip and plywood lip.

: set in the way you were going
: to do this, why did you ask??

hi rehd;
i'm always looking for better ways to do the same old things, so i asked if anyone had another idea.
i'd like to see a close-up of davids form edge if thats possible.

when i came to a solid section on my forms i used an "L" shaped clamp for that strip.

thanks; daren.....