Date: 3/16/2001, 11:47 am
: Bill,
: I have almost finished a CLC Chesapeake 16 which Ive made from 1/4" red
: meranti marine ply. (I havn't figured out if meranti and luan are the same
: thing or not.
: It is slightly heavier but considerably cheaper than okuome, which is called
: gaboon here in New Zealand hence my earlier comment.)
: The only bad thing about it was the number of splinters I got. It handled the
: twist at each end of the hull just fine.
: Pete
Meranti and luan are not the same thing. meranti is a type of wood. luan does not specify what type of wood it is. The heavier nature of meranti is correct although not to the same degree as luan here in the US atleast.
best regards,
pete czerpak
albany, NY
Messages In This Thread
- luan plywood for Mill Creek
Bill Boyle -- 3/15/2001, 1:36 pm- Re: luan plywood for Mill Creek
Geo. Cushing -- 3/26/2001, 2:56 pm- Re: luan plywood for Mill Creek
Rick -- 3/16/2001, 8:21 am- Re: luan plywood for Mill Creek
Ken Sutherland -- 3/21/2001, 12:26 am
- Re: luan plywood for Mill Creek *Pic*
Tom Jablonski -- 3/15/2001, 2:54 pm- Re: luan plywood for Mill Creek
pete croft -- 3/15/2001, 7:09 pm- Re: luan plywood for Mill Creek
peter czerpak -- 3/16/2001, 11:47 am
- Re: luan plywood for Mill Creek
- Re: luan plywood for Mill Creek
Ross Sieber -- 3/15/2001, 1:48 pm - Re: luan plywood for Mill Creek
- Re: luan plywood for Mill Creek