Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Trueing One Edge Of Lonk Planks
By:Rehd
Date: 4/4/2001, 1:51 am
In Response To: Re: Trueing One Edge Of Lonk Planks (Jim Lindamood)

: Another trick which works well for feeding narrow stock through when you get
: close to the blade, is using an ice pick to push the material. Of course
: you are using all the other safety gear like glasses and masks as well.

: Jim

Jim

If that Ice Pick makes any contact with a blade, you will not only have a 200 mph harpoon coming at you but will also have several little carbide pellets as well. No amount of safety glasses or gloves or whatever will stop them from doing severe damage. NOT RECOMMENDED that you use anything made of metal around a saw blade.

Rehd

Messages In This Thread

Trueing One Edge Of Lonk Planks
Ken -- 4/2/2001, 1:56 am
Re: Trueing One Edge Of Lonk Planks
Scott E. Davis -- 4/6/2001, 2:03 pm
Re: Trueing One Edge Of Lonk Planks
Jim Lindamood -- 4/3/2001, 8:34 am
Re: Trueing One Edge Of Lonk Planks
Rehd -- 4/4/2001, 1:51 am
Ice pick? :(
Paul G. Jacobson -- 4/3/2001, 10:33 pm
Re: Ice pick? :(
MikeWhy -- 4/3/2001, 11:39 pm
scrap strips are great push sticks
Paul G. Jacobson -- 4/4/2001, 12:47 am
Re: scrap strips are great push sticks
Rehd -- 4/4/2001, 1:43 am
Then again, why bother?
Paul G. Jacobson -- 4/3/2001, 12:09 am
Re: Exactly
Grant Goltz -- 4/4/2001, 1:41 pm
An opposite viewpt
mike allen ---> -- 4/2/2001, 4:00 pm
Call me old fashioned but....
Jay Babina -- 4/2/2001, 10:43 am
Re: Trueing One Edge Of Lonk Planks
John Monfoe -- 4/2/2001, 5:32 am
Re: Trueing One Edge Of Long Planks
Ken -- 4/2/2001, 8:56 am
Re: Trueing One Edge Of Long Planks
Rob Macks -- 4/2/2001, 9:51 am
Re: Nothing wrong with a crooked board
Grant Goltz -- 4/4/2001, 1:27 pm
Re: Trueing One Edge Of Long Planks
Ken -- 4/2/2001, 4:44 pm
Re: Truing One Edge Of Long Planks
Paul G. Jacobson -- 4/2/2001, 3:07 am
Re: Truing One Edge Of Long Planks
Rehd -- 4/2/2001, 3:45 am
Re: Trueing One Edge Of Lonk Planks
Rehd -- 4/2/2001, 2:57 am