: There is an alternative to steaming which might be faster. Simply use thinner
: strips. If 1/4 by 3/4 strips are hard to twist, Cut a few that are 1/4 by
: 3/8. These are half the width and need half the bend. For really extreme
: transitions, go with 1/4 inch square strips. These twist easily, and since
: you only need to give them each 1/3rd the twist of a 3/4 inch wide piece
: your work goes together easily.

: Cedar is so soft that you might be able to score, or split, the ends of your
: wood with a utility knife. Get the scoring to about a foot past the point
: where your twist will be, and you'll have an easier time. Go slow with the
: knife and keep your fingers out of range. (usual knife safety)

: Unlike steaming there is no cost involved, no special equipment to set up,
: and since the strips are dry, your regular gluing process can be used.

: Hope this helps

: PGJ

Splitting or scoreing worked best for me and I clamped an 18" steel scale on the strip as a guide for the utility knife.

John