Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Sea Spirit Ready To Varnish
By:Dennis Andrew
Date: 4/19/2001, 1:02 am
In Response To: Sea Spirit Ready To Varnish *Pic* (Bobby Curtis)

Nice Boat, Bobby. I flipped my Coho for spraying quite easily; took 2 persons. Had adjustable pads, ala Wayne Reinhart to cradle the hull. Stage one: inverted with small spanners across the hatch openings. A flat board rests across the pads with the spanners laying on the board. The spanners were taped in place so they didn't need to be adjusted each time. Leave just a few inches dry on the very ends of the boat during 1st stage varnishing. When ready, lift boat with one hand, remove flat board, gentle rotate, and set kayak down on the pads. Stage 2: varnish the deck. very stable in both positions. Practice the maneuver a couple of times before it is wet

Messages In This Thread

Sea Spirit Ready To Varnish *Pic*
Bobby Curtis -- 4/18/2001, 11:28 am
Re: Sea Spirit Ready To Varnish
Bobby Curtis -- 4/19/2001, 10:10 pm
Re: Sea Spirit Ready To Varnish
Dennis Andrew -- 4/19/2001, 1:02 am
Re: Hang it and flip it! It works!!
Mike -- 4/18/2001, 10:51 pm
Re: Don't Hang it and flip it! It works!!
Grant Goltz -- 4/19/2001, 8:38 am
BEAUTIFUL BOAT !!!! *NM*
Jim Distler -- 4/18/2001, 10:49 pm
Re: Sea Spirit Ready To Varnish
don -- 4/18/2001, 10:14 pm
Re: kayak rotisserie
daren neufeld -- 4/18/2001, 10:04 pm
Re: clarifying..two rq'd. :) *NM*
daren neufeld -- 4/18/2001, 10:47 pm
Re: Sea Spirit Ready To Varnish
Dick Gamble -- 4/18/2001, 8:27 pm
Re: Sea Spirit Ready To Varnish
Nick Schade - Guillemot Kayaks -- 4/18/2001, 5:35 pm
Re: Sea Spirit Ready To Varnish
Rob Macks -- 4/18/2001, 8:29 pm
another
mike allen ---> -- 4/18/2001, 6:29 pm
Re: Sea Spirit Ready To Varnish
Grant Goltz -- 4/18/2001, 2:57 pm
Re: Sea Spirit Ready To Varnish
Shawn Baker -- 4/18/2001, 1:22 pm
Re: Sea Spirit Ready To Varnish
Chip Sandresky -- 4/18/2001, 12:37 pm
Re: Sea Spirit Ready To Varnish
Angela Watson -- 4/18/2001, 11:55 am
Another no hands holder ideas
mike allen ---> -- 4/18/2001, 1:06 pm