Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Ryobi router
By:Lance Alldrin
Date: 4/26/2001, 3:45 pm
In Response To: Re: Ryobi router (Shawn Baker)

Greetings Shawn,

I've used a couple of solutions to your router problem. The first is to put some fairly fine sandpaper between the router and base housing. On the Ryobi's, the motor slides in the base rather than thread into it like most routers. When hanging under the router table gravity does its thing and the motor slides down, out of the base. The sand paper give some "bite" to the assembly, giving a bit more grip.

The other option is to use a crutch under the router motor (one thats mounted in a table) Take a standard cheapo turnbuckle, mount one end into a piece of wood and use it to support the router. The turnbuckle allows adjustment as you change the depth of cut.

Hope this helps,
Lance

: Hi Lance,

: I bought a reconditioned Ryobi at a truckload tool sale last year, and love
: it except that the depth adjustment is a bit loose. It starts to lose
: adjustment after hanging upside down in a router table. Any suggestions?

: For a lightweight, 1/4" router, though, it's not bad. A lot better than
: the 8 year-old Craftsman I just burned up. (I wasn't being hard on it--it
: just spontaneously threw a winding that pulled itself into the spinning
: motor and bound up)

: I also just got a new 2 1/2 hp Craftsman that's still in the box.

: Shawn

: Where good routers go to die.

Messages In This Thread

router recommedations
Lee Gardner -- 4/26/2001, 9:41 am
Re: router recommedations
Nick Schade - Guillemot Kayaks -- 4/27/2001, 9:58 am
DeWalt 610
Tom Kurth -- 4/26/2001, 10:37 pm
Re: a choral response
Lee Gardner -- 4/26/2001, 10:32 pm
Re: router recommedations
Rob Macks -- 4/26/2001, 1:13 pm
Re: router recommedations
Jim -- 4/26/2001, 2:04 pm
Re: router recommedations
Steve L -- 4/26/2001, 2:30 pm
Re: router recommedations
Mike Boren -- 4/26/2001, 1:49 pm
Re: Fine Woodworking
Shawn Baker -- 4/26/2001, 1:45 pm
PC, Bosch, Craftsman
Mark R. -- 4/26/2001, 12:10 pm
Re: router recommedations
Lance Alldrin -- 4/26/2001, 11:52 am
Re: Ryobi router
Shawn Baker -- 4/26/2001, 1:17 pm
Re: Ryobi router
Lance Alldrin -- 4/26/2001, 3:45 pm
Re: Ryobi router
Shawn Baker -- 4/26/2001, 4:47 pm
Re: router recommedations
Byron -- 4/26/2001, 10:18 am
Re: router recommedations
Russell Brown -- 4/26/2001, 11:36 am
Re: router recommedations
daniel -- 4/26/2001, 10:41 am
I like my Bosch
tony b -- 4/26/2001, 11:10 am