Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Cutting Strips: Kerf Pinching The Saw Blade
By:Arthur
Date: 4/29/2001, 3:44 pm
In Response To: Re: Cutting Strips: Kerf Pinching The Saw Blade (Grant Goltz)

I used board buddies and they worked really well. I don't think they are part of your problem. Actually I found it is best to only have one person control the feed board (I cut with 2 people, but the 2nd man didn't touch the main board). I cut 18' and 20' strips on the table saw. Check you rig for exact straightness and try another board and know that you do not WANT another person to help, just keep thefeed cpnstant and against the fence. good luck.

Arthur

Messages In This Thread

Cutting Strips: Kerf Pinching The Saw Blade
Ken -- 4/29/2001, 7:35 am
Re: Cutting Strips: Kerf Pinching The Saw Blade
Paul G. Jacobson -- 4/29/2001, 8:00 pm
Re: Cutting Strips: Kerf Pinching The Saw Blade
Ken -- 4/29/2001, 11:25 pm
Re: Cutting Strips: Kerf Pinching The Saw Blade
Paul G. Jacobson -- 4/30/2001, 3:06 am
Re: Cutting Strips: Kerf Pinching The Saw Blade
Ken -- 4/30/2001, 6:02 am
Islands in the (cutting) stream
Paul G. Jacobson -- 5/1/2001, 3:17 am
Re: Cutting Strips: Kerf Pinching The Saw Blade
Mike Boren -- 4/30/2001, 3:39 pm
Re: Cutting Strips: Kerf Pinching The Saw Blade
Grant Goltz -- 4/29/2001, 10:10 am
Re: Cutting Strips: Kerf Pinching The Saw Blade
Ken -- 4/29/2001, 5:22 pm
Re: Cutting Strips: Kerf Pinching The Saw Blade
Rob Macks -- 4/29/2001, 6:14 pm
Re: Cutting Strips: Kerf Pinching The Saw Blade
Arthur -- 4/29/2001, 3:44 pm
Re: Cutting Strips: Kerf Pinching The Saw Blade
Ken -- 4/29/2001, 5:16 pm
Re: Cutting Strips: Kerf Pinching The Saw Blade
Mike Nicholson -- 4/29/2001, 9:23 am