: David,
: I'm not an engineer and I hope there isn't major problem doing the bulkhead
: using horizontal strips as this is how I did mine. I put it in place with
: thickened epoxy fillets and then used bias cut glass to reinforce it on
: both sides. I then added the support ledges for the main deck and the rear
: mini deck. Looks like a good place to add some floation before sealing it
: up. Any suggestions Rob or is the space too small to bother?

are you adding a drain/vent plug or hole at the very pk so if probs or heat can relieve pressure or drain??

-mick