stitch and glue tender
By:patrick
Date: 5/5/2001, 6:53 pm
Date: 5/5/2001, 6:53 pm
Hi
I am building a stitch and glue tender as a trial run for my boatbuilding skills. My question is really simple; do I have to plane the edges of the 1/4 inch ply so that each edge butts accurately against its adjoining piece. Alternatively can I just leave them square and rely on the glue and fibreglass strips to fill in the gaps.
Messages In This Thread
- stitch and glue tender
patrick -- 5/5/2001, 6:53 pm- making mitres
mike allen ---> -- 5/9/2001, 2:43 pm- Re:Old cabinet builder trick.
Tony -- 5/9/2001, 2:26 pm- Re: Radius Panel Corners
Dave Houser -- 5/5/2001, 7:08 pm- Re: Radius Panel Corners
Mike Scarborough -- 5/6/2001, 9:28 am- Re: Radius Panel Corners
Dave Houser -- 5/6/2001, 5:43 pm
- Re: Radius Panel Corners
patrick -- 5/6/2001, 4:42 am - Re: Radius Panel Corners
- Re:Old cabinet builder trick.
- making mitres