Panels not quite fair
I'm building a Chesapeake 16. I cut out the hull panels about a month ago today I finally got caught up with the LIST and was thinking about wireing them togeather. The keel line of the bottom panels is not fair. This may be due to an unfair batten I used to lay this panel out, or mabe I screwed up in my measurements. I'm thinking that since the edge of the panels that will become the chine is fair I can pull the widths at the stations and subtract about 1/8" and strike a fresh line through these points and come up with a slightly narrower hull. Any thoughts? Thanks.
Bob
Messages In This Thread
- Panels not quite fair
bob -- 5/6/2001, 11:01 pm- Re: Panels not quite fair
Pete Croft -- 5/7/2001, 7:53 pm- Re: Panels not quite fair
Dave Houser -- 5/7/2001, 3:34 pm- Re: Panels not quite fair
Lee Gardner -- 5/7/2001, 12:12 am - Re: Panels not quite fair
- Re: Panels not quite fair