Yeah, you probably don't have enough wood on the boats to give you strength enough to haul them on top of a rack. You should be just fine with them hung in the top of a big truck. Good luck!!

I just moved an incomplete 16' stitch & glue kayak. It's still in flat panels, but they're 4mm x 16' long. I duct-taped them to a 16' long 2x4 and wrapped the whole thing in plastic. It's moved 250 miles and 150 miles with no apparent damage. I don't expect any to show up when I finally get back to work next week. (4 months after gluing the panels up)

Shawn

: I have three strips on one boat and eleven on the other. I'm getting a 24'
: Ryder truck that the two 21' boats should slide into nicely. I figure I
: can put a hole near the top of several station molds and secure a line
: from there to the sides of the truck in order to keep them from flopping
: over.