Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Got the black silicone.
By:John Monfoe
Date: 5/14/2001, 6:03 am
In Response To: Re: Silly Cones (Geo. Cushing)

: John,
: For a bedding compound you're better off with a marine sealant. 3M has a good
: line in white and black. Stay away from their 5200 if you may ever want to
: remove the fixture. Like anything with "marine" connected to it
: these products aren't cheap, but are gnerally available. I have found some
: at my local "Big Lots" store were they go for a buck for a tube
: good for a job like your's.
: Good lick.
: Geo. C.

I got my black silicone at Lowes yesterday and have the deck plates installed. But "Big Lots" is one of my favorite bargan stores. I hooked a wire to a nail and my router to cut out the circle for the plates. The side compartments are all fabricated and I will start installing them today. To answer one of the other responses, these plates don't have any O rings, it's more like a pipe thread that seals them water tight.

John

Messages In This Thread

Beckson 8" screw out deck plates *Pic*
John Monfoe -- 5/12/2001, 6:46 am
Re: silicon
Mark -- 5/13/2001, 3:15 pm
Look quick before they shut this photo out. *Pic*
John Monfoe -- 5/13/2001, 7:10 am
Re: Silly Cones
Geo. Cushing -- 5/13/2001, 9:23 pm
Got the black silicone.
John Monfoe -- 5/14/2001, 6:03 am
Grease
Mike Nicholson -- 5/12/2001, 9:33 pm
Re: Grease
John Monfoe -- 5/13/2001, 6:44 am
Re: Grease
Mark -- 5/13/2001, 3:23 pm
Re: New Tool, O.T. *Pic*
Rehd -- 5/12/2001, 10:06 am
Re: New Tool, O.T.
LeeG -- 5/12/2001, 12:21 pm
Re: New Tool, O.T.
Tom-Atlanta -- 5/12/2001, 1:36 pm
Re: New Tool, O.T.
Rehd -- 5/13/2001, 1:22 am
Re: New Tool, O.T.
Roy Morford -- 5/12/2001, 11:59 am
Re: The Next One...... O.T.
Rehd -- 5/13/2001, 1:53 am
Re: The Next One...... O.T.
Roy Morford -- 5/13/2001, 11:58 am
Free Plans
Jason Koldewijn -- 5/12/2001, 6:40 pm
Re: Free Plans
Roy Morford -- 5/12/2001, 7:31 pm
Priorities!
Jason Koldewijn -- 5/12/2001, 7:53 pm
Download the .pdf file for a better view! *NM*
Jason Koldewijn -- 5/12/2001, 6:41 pm
Re: New Tool, O.T.
Roger Nuffer -- 5/12/2001, 10:13 am
Re: New Tool, O.T.
Rehd -- 5/13/2001, 2:13 am
Re: New Tool, O.T.
Rehd -- 5/12/2001, 10:08 am