Re: gap man to the rescue
By:LeeG
Date: 5/22/2001, 2:41 pm
Date: 5/22/2001, 2:41 pm
In Response To: S&G deck separation? (Chet Lee)
Hi Chet, as mentioned you use a fillet to connect the two. You might want to run a piece of rough sandpaper back and forth a couple times to rough up the deck, mask the bulkhead back about 3/8", turn the boat over on something that puts the kayak at a comfortable height, for gooping at a distance I like to use a sandwich bag with the end cut off like a pastry dispenser, lay a bead along the gap, run your gloved finger over it, pull tape up, later on as it firms up you can run a gloved finger wetted in alcohol along it to smooth it off if it looks too rough. I think the manual mentions something about filleting the bulkhead to the deck.
Messages In This Thread
- S&G deck separation?
Chet Lee -- 5/22/2001, 12:21 pm- Re: S&G deck separation?
Randy Knauff -- 5/23/2001, 3:02 pm- Re: S&G deck separation?
byron -- 5/23/2001, 1:40 pm- Re: How to stop it next time
Pete Croft -- 5/22/2001, 11:37 pm- Re: How to stop it next time
Lisa S -- 5/23/2001, 10:31 pm- Re: How to stop it next time
John Monfoe -- 5/23/2001, 5:59 am - Re: How to stop it next time
- Re: gap man to the rescue
LeeG -- 5/22/2001, 2:41 pm- Re: gap man to the rescue
LeeG -- 5/22/2001, 8:51 pm
- Re: S&G deck separation?
Dave E -- 5/22/2001, 2:19 pm- Re: Use a headlamp!
Shawn Baker -- 5/22/2001, 7:46 pm- Re: Use a headlamp!
LeeG -- 5/22/2001, 8:49 pm- Re: Lamp
Geo. Cushing -- 5/24/2001, 4:24 pm
- Re: Lamp
- Re: Use a headlamp!
- Re: S&G deck separation?
Shawn Baker -- 5/22/2001, 1:07 pm - Re: S&G deck separation?
- Re: S&G deck separation?