Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Brad Nailer Nails
By:Jerry Siegel
Date: 5/23/2001, 10:06 pm
In Response To: Pnuematic Nailer (Mike Boren)

Many brad style nails for air nailers have an adhesive coating and thus are a real bugger to remove. I use them whem I really need the holding power, but leave a 1/4" above the strip. Do not remove these with side cutters, as you may cut them off flush inadvertently, and that is a whole new can of worms to deal with.

Messages In This Thread

Pnuematic Nailer
Mike Boren -- 5/22/2001, 6:35 pm
Re: Pnuematic Nailer
Geo. Cushing -- 5/24/2001, 4:10 pm
Brad Nailer Nails
Jerry Siegel -- 5/23/2001, 10:06 pm
Re: Pnuematic Nailer
Don Beale -- 5/23/2001, 1:18 pm
Re: Pnuematic Nailer
Chip Sandresky -- 5/22/2001, 8:37 pm
Re: Oil
Shawn Baker -- 5/22/2001, 7:43 pm