: I ran out of Raka and had to pick up some West System w/slow hardener. I
: rolled on the last (I hope) coat. The temperature inside my greenhouse was
: well over 100 so the epoxy was reasonably hard after only a few hours -
: but now it feels greasy/waxy. Raka never had any blush that I could detect
: so I have no experience with this.
: Can I just sand everything before I varnish, or should I wash the boat with
: something?

Wash the boat. Sanding won't remove the blush, it will just smear it around. Dish soap (like Dawn or whatever you happen to use) & water & a nylon scrubbie pad should take it right off.

Julie Kanarr