Date: 6/25/2001, 10:33 am
Congratulations on a great looking boat!!
It really is a good feeling to paddle a boat of your own making..don't forget to look up from admiring that beautiful wood craft every now and then to see where you are going
Enjoy it!
Ben Staley
: It's been a hell of a weekend. Until I started building my boat I had only
: seen one other stripper. That was one of Nick's I think at a kayak show a
: few years ago. I remember thinking..."yeah it's pretty but who would
: want a big heavy wooden kayak" so I went back to looking at the red
: and yellow plastic boats. I've since seen the light. I saw lots of nice
: boats Saturday at Bluff Point and a lot of good ideas. I've been
: struggling with my hatch hold downs but I saw 2 or 3 better solutions at
: the gathering. That was great but I topped it today when I took my own
: boat on it's maiden voyage. It's not finished...still needs varnish and
: deck rigging but I had to try it. I love it...it tracks, turns, is more
: comfortable and is faster then my old plastic boat. Sitting in a boat I
: built myself and have it perform as well as it did is a very nice
: experience. But you guys know that:)
Messages In This Thread
- Guillemot "L" Launch *Pic*
Dave Seales -- 6/24/2001, 11:40 pm- Re: Guillemot "L" Launch
Roger Nuffer -- 6/25/2001, 3:39 pm- Great looking boat/design! *NM*
Bob Deutsch -- 6/25/2001, 2:48 pm- Re: Guillemot "L" Launch
Ben Staley -- 6/25/2001, 10:33 am- Re: Great Job! It's a fun boat *NM*
Shawn Baker -- 6/25/2001, 10:26 am- Nice Job
David Hanson -- 6/25/2001, 9:49 am- Re: Nice Job
Dave Seales -- 6/25/2001, 12:17 pm- Re: Nice Job
David Hanson -- 6/25/2001, 3:41 pm- Re: Nice Job
LeeG -- 6/28/2001, 8:30 pm- how transparent was the dynel
mike allen ---> -- 6/25/2001, 5:32 pm- Fairly clear *Pic*
David Hanson -- 6/26/2001, 9:36 am- Re: how transparent was the dynel
David Hanson -- 6/25/2001, 5:44 pm - Re: how transparent was the dynel
- Re: Vacuum-Bagging Dynel
Shawn Baker -- 6/25/2001, 4:06 pm- An idea for you
Brian Nystrom -- 6/25/2001, 5:22 pm- Re: An idea for you
Bruce Schultz -- 6/26/2001, 9:51 am
- Re: Vacuum-Bagging Dynel
David Hanson -- 6/25/2001, 4:23 pm- Re: Vacuum-Bagging Dynel
Shawn Baker -- 6/25/2001, 4:31 pm
- Re: An idea for you
- how transparent was the dynel
- Re: Weights
Shawn Baker -- 6/25/2001, 12:36 pm- Re: Weights...design question
Ben Staley -- 6/25/2001, 1:03 pm- Re: Save weight with materials/methods, not size
Shawn Baker -- 6/25/2001, 4:29 pm- Re: Save weight with materials/methods, not size
Ben Staley -- 6/25/2001, 5:00 pm- Re: Save weight with materials/methods, not size
Tom -- 6/26/2001, 1:41 pm- Re: Save weight with materials/methods, not size
LeeG -- 6/26/2001, 2:40 pm- Re: Save weight with materials/methods, not size
Tom -- 6/27/2001, 9:43 am- Re: Save resistance with optimum hull design
Shawn Baker -- 6/27/2001, 11:23 am
- Re: Save resistance with optimum hull design
- Re: Save weight with materials/methods, not size
- a problem w/ matching resin/glass wt?
mike allen ---> -- 6/25/2001, 6:15 pm - Re: Save weight with materials/methods, not size
- Re: Save weight with materials/methods, not size
- Re: Weights...design question
Shawn Baker -- 6/25/2001, 4:02 pm- Re: Weights...design question
Paul G. Jacobson -- 6/25/2001, 3:59 pm - Re: Save weight with materials/methods, not size
- Re: Weights
Dave Seales -- 6/25/2001, 12:52 pm - Re: Save weight with materials/methods, not size
- Re: Nice Job
- Re: Nice Job
- Great looking boat/design! *NM*
- Re: Guillemot "L" Launch