Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Nice Job
By:David Hanson
Date: 6/25/2001, 3:41 pm
In Response To: Re: Nice Job (Dave Seales)

I used 6 oz inside and out triple in seat area. About 9 layers in the hatch area for lip. 4" tape 12 oz bias inside and out at bow and stern for about 40 inches and all around the inside of cocpit recess.

The killer was my football double piece on the outside is dynel, must have soaked up 1\2 a gallon on that alone! What a sanding nightmare, never thought it would be smooth.

The sliding foot rest minicel seat and backrest.

Messages In This Thread

Guillemot "L" Launch *Pic*
Dave Seales -- 6/24/2001, 11:40 pm
Re: Guillemot "L" Launch
Roger Nuffer -- 6/25/2001, 3:39 pm
Great looking boat/design! *NM*
Bob Deutsch -- 6/25/2001, 2:48 pm
Re: Guillemot "L" Launch
Ben Staley -- 6/25/2001, 10:33 am
Re: Great Job! It's a fun boat *NM*
Shawn Baker -- 6/25/2001, 10:26 am
Nice Job
David Hanson -- 6/25/2001, 9:49 am
Re: Nice Job
Dave Seales -- 6/25/2001, 12:17 pm
Re: Nice Job
David Hanson -- 6/25/2001, 3:41 pm
Re: Nice Job
LeeG -- 6/28/2001, 8:30 pm
how transparent was the dynel
mike allen ---> -- 6/25/2001, 5:32 pm
Fairly clear *Pic*
David Hanson -- 6/26/2001, 9:36 am
Re: how transparent was the dynel
David Hanson -- 6/25/2001, 5:44 pm
Re: Vacuum-Bagging Dynel
Shawn Baker -- 6/25/2001, 4:06 pm
An idea for you
Brian Nystrom -- 6/25/2001, 5:22 pm
Re: An idea for you
Bruce Schultz -- 6/26/2001, 9:51 am
Re: Vacuum-Bagging Dynel
David Hanson -- 6/25/2001, 4:23 pm
Re: Vacuum-Bagging Dynel
Shawn Baker -- 6/25/2001, 4:31 pm
Re: Weights
Shawn Baker -- 6/25/2001, 12:36 pm
Re: Weights...design question
Ben Staley -- 6/25/2001, 1:03 pm
Re: Save weight with materials/methods, not size
Shawn Baker -- 6/25/2001, 4:29 pm
Re: Save weight with materials/methods, not size
Ben Staley -- 6/25/2001, 5:00 pm
Re: Save weight with materials/methods, not size
Tom -- 6/26/2001, 1:41 pm
Re: Save weight with materials/methods, not size
LeeG -- 6/26/2001, 2:40 pm
Re: Save weight with materials/methods, not size
Tom -- 6/27/2001, 9:43 am
Re: Save resistance with optimum hull design
Shawn Baker -- 6/27/2001, 11:23 am
a problem w/ matching resin/glass wt?
mike allen ---> -- 6/25/2001, 6:15 pm
Re: Weights...design question
Shawn Baker -- 6/25/2001, 4:02 pm
Re: Weights...design question
Paul G. Jacobson -- 6/25/2001, 3:59 pm
Re: Weights
Dave Seales -- 6/25/2001, 12:52 pm