Date: 6/26/2001, 1:41 pm
I went through this when I recently took my 17.5' kayak I designed a 4 years ago and lengthened it out to 19'. I adjusted the sections to optimize the prismatic coeffient for best efficiency at high speed. Interestly, resistance calculations showed the increased frictional resistance due to the increase in surface area was more than offset by the decrease in wave making resistance.
Wow, I though I was being conservative when I put a second 4 oz. layer on the outside bottom of the hull of my boat, the rest being a single layer of 4 oz. over 3/16 strips. My boat weighs 30 pounds, making my old kevlar boat a dog. I wouldn't take this boat on an expedition though.
-Tom
Messages In This Thread
- Guillemot "L" Launch *Pic*
Dave Seales -- 6/24/2001, 11:40 pm- Re: Guillemot "L" Launch
Roger Nuffer -- 6/25/2001, 3:39 pm- Great looking boat/design! *NM*
Bob Deutsch -- 6/25/2001, 2:48 pm- Re: Guillemot "L" Launch
Ben Staley -- 6/25/2001, 10:33 am- Re: Great Job! It's a fun boat *NM*
Shawn Baker -- 6/25/2001, 10:26 am- Nice Job
David Hanson -- 6/25/2001, 9:49 am- Re: Nice Job
Dave Seales -- 6/25/2001, 12:17 pm- Re: Nice Job
David Hanson -- 6/25/2001, 3:41 pm- Re: Nice Job
LeeG -- 6/28/2001, 8:30 pm- how transparent was the dynel
mike allen ---> -- 6/25/2001, 5:32 pm- Fairly clear *Pic*
David Hanson -- 6/26/2001, 9:36 am- Re: how transparent was the dynel
David Hanson -- 6/25/2001, 5:44 pm - Re: how transparent was the dynel
- Re: Vacuum-Bagging Dynel
Shawn Baker -- 6/25/2001, 4:06 pm- An idea for you
Brian Nystrom -- 6/25/2001, 5:22 pm- Re: An idea for you
Bruce Schultz -- 6/26/2001, 9:51 am
- Re: Vacuum-Bagging Dynel
David Hanson -- 6/25/2001, 4:23 pm- Re: Vacuum-Bagging Dynel
Shawn Baker -- 6/25/2001, 4:31 pm
- Re: An idea for you
- how transparent was the dynel
- Re: Weights
Shawn Baker -- 6/25/2001, 12:36 pm- Re: Weights...design question
Ben Staley -- 6/25/2001, 1:03 pm- Re: Save weight with materials/methods, not size
Shawn Baker -- 6/25/2001, 4:29 pm- Re: Save weight with materials/methods, not size
Ben Staley -- 6/25/2001, 5:00 pm- Re: Save weight with materials/methods, not size
Tom -- 6/26/2001, 1:41 pm- Re: Save weight with materials/methods, not size
LeeG -- 6/26/2001, 2:40 pm- Re: Save weight with materials/methods, not size
Tom -- 6/27/2001, 9:43 am- Re: Save resistance with optimum hull design
Shawn Baker -- 6/27/2001, 11:23 am
- Re: Save resistance with optimum hull design
- Re: Save weight with materials/methods, not size
- a problem w/ matching resin/glass wt?
mike allen ---> -- 6/25/2001, 6:15 pm - Re: Save weight with materials/methods, not size
- Re: Save weight with materials/methods, not size
- Re: Weights...design question
Shawn Baker -- 6/25/2001, 4:02 pm- Re: Weights...design question
Paul G. Jacobson -- 6/25/2001, 3:59 pm - Re: Save weight with materials/methods, not size
- Re: Weights
Dave Seales -- 6/25/2001, 12:52 pm - Re: Save weight with materials/methods, not size
- Re: Nice Job
- Re: Nice Job
- Great looking boat/design! *NM*
- Re: Guillemot "L" Launch