: John,
: What I did was to take rice paper and tape it to a piece of copy paper on all
: edges and run it through the copy machine. After a couple of tries I got
: it down pat on how to hold the paper just right in the manual feed so it
: passed through without wrinkles. It would not work in the standard paper
: tray. My ink jet caused the designs to weep when I applied the epoxy on
: some test tries. Which inks do you use in your printer?
: Steve

Steve,
I used Cinphi System's refills from "www.cinphi.com" for HP 722C printer. I worried that it might weep and I was ready to take it off and wipe off the residue ink but it turned out OK. So far. The ink made the thin paper slightly wrinkle but I have it sealed under three coats of epoxy but I haven't sanded it yet. I was going to try rice paper but couldn't find any.