Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Re: Flush hatch spacers
By:peter czerpak
Date: 7/17/2001, 3:40 pm
Date: 7/17/2001, 3:40 pm
In Response To: Flush hatch spacers (Greg Jones)
: For those of you who have built flush hatches using 4mm plywood I have two
: questions: 1.) Did you use one or two (4mm or 8mm) spacer rings? 2.) Does
: the thickness depend on the hatch hold-down method (bungee or screw-down)?
: Thanks in advance.
: - Greg
thickness depends on the seal thickness and compression on it.
pete czerpak
albany, NY
PS. I used about 6 to 8 mm thickness.
Messages In This Thread
- Flush hatch spacers
Greg Jones -- 7/17/2001, 2:02 pm- Re: Flush hatch spacers
peter czerpak -- 7/17/2001, 3:40 pm
- Re: Flush hatch spacers
