Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Gutter less car rack holder designed by Gorden
By:John Monfoe
Date: 7/21/2001, 7:00 am

: I plan on running two 1 1/8" outside dia. round conduit pipes across
: the car and into the oak side rails. On that will fit 4 Yakima Kayak
: Saddles I got off of E-bay.
: John
: Have you considered 3/4" black pipe used for bar clamps/gas lines. I
: think it would be stronger then conduit piping. There is considerable
: loads placed on roof rack bars at highway speeds and I have even managed
: to bend Yakima's bars when pushing therewieght limit of 100 Lbs per cross
: bar. Just a thought.
: Cheers
: Rick

Hi Rick,

I e-mailed the seller of the Yakima Kayak Saddles asking him the size pipe they would fit on and he said that Yakima bars were 1 1/8" in dia. I then went out looking at pipe of all kinds and could only find one piping with a dia that fit and that was the conduit. That is why I am excited with the idea bill has.

John

Messages In This Thread

Gutter less car rack holder designed by Gorden *Pic*
John Monfoe -- 7/20/2001, 5:38 am
Re: Gutter less car rack holder designed by Gorden
rick M -- 7/20/2001, 9:00 pm
Re: Gutter less car rack holder designed by Gorden
John Monfoe -- 7/21/2001, 7:00 am
Re: Gutter less car rack holder designed by Gorden
Bill Boyd -- 7/21/2001, 1:20 am
Re: Gutter less car rack holder designed by Gorden
John Monfoe -- 7/21/2001, 6:37 am
Re: Gutter less car rack holder designed by Gorden
Bill Boyd -- 7/21/2001, 10:19 am
Re: Should work well
Shawn Baker -- 7/20/2001, 10:46 am
Re: Should work well
John Monfoe -- 7/21/2001, 6:52 am
That's great!
Tony B -- 7/20/2001, 8:41 am