: I've made my hatch lips using the One Ocean Kayak method that looked so easy
: on Ross and Spidey's websites, the process seems to be going well. I used
: 1/8 X 3/8 neoprene gasket as a mold for the channel and will use 1/4 X 3/8
: or 3/8 X 3/8 neoprene for my seal. The question that I have is, how do I
: get all the foam bits out of the channel in the lip? I've scraped most of
: the foam out but have a layer stuck to the epoxy. Should I have used a
: release agent of some sort, do I just need to use more elbow grease, or is
: there an easy way to remove the residual foam?

: Thanks,

: Ken

Hi Ken,
I used a wood chisel to scrape all the foam off. I cut right down to the first (of several) layer of glass and added another couple of epoxy coats.

Larry C.