Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Rack Update + question.
By:Lisa S
Date: 8/2/2001, 10:07 am
In Response To: Rack Update + question. *Pic* (John Monfoe)

Is there enough clearance on the rear bar to compensate for the weight of the kayak and keep it from putting a huge dent in the roof of the car? It's hard to tell from the photo.

: Almost finished. I was able to get away with inserting the cross bars into
: the oak runners and pinned them with 3" screws through the top of the
: wood runners. There is no clearance on the back bar as it just touches the
: roof. I ended up using 1 1/8" outside dia. conduit pipe, painted with
: auto primer and three coats of thinned rubber tool diping material for a
: rust free and mar free bars and clips. I still have to drill 1/4"
: holes at a 45 degree angle for the bolts to fasten the rack to the clips,
: but the hard work is over. The saddles are Yakima LandShark Saddles and I
: made a good buy on e-bay for them.

: What is the best way to carry a Kayak, right side up or upside down? Thanks.

: John

Messages In This Thread

Rack Update + question. *Pic*
John Monfoe -- 8/2/2001, 8:06 am
Re: Rack Update + question.
Lisa S -- 8/2/2001, 10:07 am
Re: Rack Update + question.
John Monfoe -- 8/3/2001, 4:48 am
Noodles
!RUSS -- 8/4/2001, 8:16 am
Keel down and looped
!RUSS -- 8/2/2001, 8:32 am
Re: Keel down and looped
John Monfoe -- 8/3/2001, 5:07 am
Hatch cover
!RUSS -- 8/4/2001, 8:12 am
Re: Hatch cover
John Monfoe -- 8/5/2001, 5:49 am
Re: strap buzz
Val Wann -- 8/2/2001, 2:24 pm