: To deal with the sagging, you add C-flex. C-flex is thin glass 'rod' stitched
: together by E glass. The rod provided the stiffness to spend between the
: forms. The whole thing than is saturated with polyester or epoxy (notice
: epoxy has no advantage over poly and poly is cheaper and stiffer). More
: layers of fibreglass ( usually alternate layers of mat and cloth ) are
: added to provide the thickness. The whole shell is than pop off the forms
: and more layers are added to the inside with the last being 3 oz for
: smoothness. You do not need to use wood in this kind of construction (
: except for the forms.)
: C-flex is usually used for one of small fiberglass boat construction as it
: does not require a plug or full female mold--$$$. Nick's internal form
: system works well withn this kind of construction.
: Hope this will help.
: Good luck.

If I get this right, you are saying that you could build a glass kayak with c-flex layed directly over what is essentially the same mold as used for strippers? hmmmmm.

thanks