Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Hatch seal
By:Chris Boucher
Date: 6/29/1998, 10:07 am
In Response To: Hatch seal (Mark Bodnar)

> Has anyone else had this problem?

> Any easy fixes? (any good suggestions for making the hatch covers?-I
> made a jig to bend the hatch and hold the curved frame in place to
> epoxy - came out well but slightly warped)

Mark,

Sounds like you have a situation similar to what I faced a week or so ago. Are you building from a kit? If not, you may want to use the 3/4 X 3/8 foam weather stripping that CLC ships with the kits. I had a gap on the back of the aft hatch that I filled by placing a section of foam in the area that needed building up. Using a pair of scissors, I beveled the ends so the full length piece of stripping would lay smoothly ofver this filler piece. It is very unnoticeable and works perfectly. I would not recommend re-inventing the wheel. If you have the hatches built, you can make them work. Don't start taking the bracing off. You'll be asking for trouble.

Messages In This Thread

Hatch seal
Mark Bodnar -- 6/26/1998, 3:44 pm
Re: Hatch seal: discerning highs and lows
Mark Kanzler -- 6/29/1998, 6:35 pm
Re: Hatch seal
NPenney -- 6/29/1998, 4:43 pm
Re: Hatch seal
Chris Boucher -- 6/29/1998, 10:07 am
Re: Hatch seal
Jay Babina -- 6/29/1998, 8:50 am
threaded rod description please?
Ross Leidy -- 6/29/1998, 9:18 am
Re: threaded rod description please?
Mark Kanzler -- 6/30/1998, 1:10 pm
Re: threaded rod description please?
Jay Babina -- 6/30/1998, 11:45 am
threaded rod questions
Mark Bodnar -- 7/3/1998, 10:00 pm
Re: threaded rod questions
Jay Babina -- 7/5/1998, 10:10 am
Re: threaded rod questions
Paul Jacobson -- 7/4/1998, 8:10 pm
Re: Doll Stock
Mark Kanzler -- 7/6/1998, 1:13 pm
Re: threaded rod questions
Tor-Henrik Furmyr -- 7/4/1998, 4:19 am
Re: threaded rod questions
Mark Kanzler -- 7/4/1998, 10:28 am
Re: Hatch - flush mount...
Tor-Henrik Furmyr -- 7/4/1998, 3:37 pm
Re: Hatch - flush mount...
Mark Kanzler -- 7/6/1998, 1:06 pm
Re: Hatch - flush mount...
Paul Jacobson -- 7/6/1998, 5:51 pm
Re: Hatch - flush mount...
Mark Kanzler -- 7/6/1998, 6:21 pm
Re: Hatch - flush mount...
Mike Spence -- 7/4/1998, 11:19 pm
Re: Impress us....
Tor-Henrik Furmyr -- 7/5/1998, 4:10 am
Re: Impress us.... -- I'll try!
Mike Spence -- 7/5/1998, 11:48 am
Re: Impress us.... -- I'll try!
Nick Schade -- 7/5/1998, 10:43 pm
Re: Impress us.... -- I'll try!
jim champoux -- 7/6/1998, 5:45 pm
Re: Impress us.... -- I'll try!
npenney@erols.com -- 7/7/1998, 8:22 pm
Re: Metal and compasses
Nick Schade -- 7/7/1998, 2:16 pm
Re: Impress us.... -- I'll try!
Mark Kanzler -- 7/6/1998, 6:06 pm
Re: Impress us.... -- I'll try!
Tor-Henrik Furmyr -- 7/5/1998, 1:33 pm
Breather hole - is it necessary?
Mike Spence -- 7/3/1998, 1:20 pm
Re: Breather hole - is it necessary?
Jay Babina -- 7/3/1998, 3:29 pm
Re: Breather hole - is it necessary?
Nick Schade -- 7/4/1998, 5:50 pm
Re: Breather hole - is it necessary?
Mark Kanzler -- 7/4/1998, 10:34 am
Re: Breather hole - How much pressure?
Mark Kanzler -- 7/4/1998, 5:37 pm
Re: threaded rod -DRAWING
Tor-Henrik Furmyr -- 7/3/1998, 6:27 am
Re: threaded rod -DRAWING (Very Nice)
Mark Kanzler -- 7/3/1998, 10:06 am
Re: threaded rod description please?
Ross Leidy -- 7/1/1998, 12:14 am
Re: threaded rod picture please?
Mark Kanzler -- 6/30/1998, 11:57 am
Re: threaded rod picture please?
Jay Babina -- 6/30/1998, 7:37 pm
Re: Email address (Mine and everyone's)
Mark Kanzler -- 7/1/1998, 10:59 am
Re: Hatch seal
Rob Forsell -- 6/27/1998, 10:34 am
Re: Hatch seal
Paul Jacobson -- 6/26/1998, 10:04 pm
Re: Hatch seal
Rick C. -- 6/28/1998, 11:37 pm
Re: Hatch seal
Mark Bodnar -- 7/1/1998, 11:02 am
Re: Hatch seal
David Dick -- 6/26/1998, 8:29 pm
Re: Hatch seal
Jerry Weinraub -- 6/26/1998, 7:14 pm
Re: Hatch seal
Mark Kanzler -- 6/26/1998, 4:51 pm
Re: Hatch seal
Mark Bodnar -- 6/26/1998, 8:05 pm