Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Basement advice
By:Dale Frolander
Date: 8/16/2001, 2:42 pm
In Response To: Depth question (Mike)

If you build it in the basement, don't forget to wall off the area with some plastic. Then make a board to fit in that window, cut a hole in the board and install one of those small office fans in it. That's what I did and it has plenty of power to make negative pressure in the room to keep the sanding dust and epoxy fumes out of the rest of the house. I actually open the plastic up a bit to get the air to flow outside.

Messages In This Thread

Depth question
Mike -- 8/16/2001, 12:52 pm
No problem
Larry C. -- 8/16/2001, 5:40 pm
Re: and pad the window
Don Beale -- 8/16/2001, 5:22 pm
this time for real
Pete Notman -- 8/16/2001, 5:11 pm
Re: Depth question *NM*
Pete Notman -- 8/16/2001, 5:04 pm
Depth is for submarines :D not yaks
!RUSS -- 8/16/2001, 3:12 pm
Basement advice
Dale Frolander -- 8/16/2001, 2:42 pm
Exhaust fan
Mike -- 8/16/2001, 8:20 pm
But...
Dale Frolander -- 8/17/2001, 1:11 am
Re: Basement advice
addison -- 8/16/2001, 5:33 pm
Re: Depth question
Don Beale -- 8/16/2001, 2:21 pm
Re: Depth question
mike allen -- 8/16/2001, 1:38 pm