Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: kayak shed options
By:LeeG
Date: 8/20/2001, 8:42 am
In Response To: Re: kayak shed options (Mike Nicholson)

Mike, would it be possible to double the plastic with a layer on the inside making an air gap for insulation? Maybe furring strips zip tied to the inside of the pvc then the other layer of plastic stapled onto that...but with ground as the floor there's a big heat sink pulling the heat out. just a thought.

Messages In This Thread

kayak shed options
Greg Root -- 8/19/2001, 1:11 pm
Re: kayak shed options *Pic*
Mike Nicholson -- 8/19/2001, 8:10 pm
Re: kayak shed options
Greg Root -- 8/20/2001, 9:14 am
Re: kayak shed options
Tom -- 8/19/2001, 10:40 pm
Re: kayak shed options
Mike Nicholson -- 8/20/2001, 7:42 am
Re: kayak shed options
LeeG -- 8/20/2001, 8:42 am
Re: kayak shed options *Pic*
Mike Nicholson -- 8/21/2001, 8:34 am
Re: kayak shed options
Jim -- 8/21/2001, 12:43 pm
heating the shed *Pic*
Paul G. Jacobson -- 8/20/2001, 12:20 am