Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Outgassing/ Large Bubbles/Cured Epoxy/Danke!
By:B.Gorr
Date: 8/20/2001, 2:31 pm
In Response To: Re: Outgassing/ Large Bubbles/Cured Epoxy (Nick Schade - Guillemot Kayaks)

Vielen Dank Nick and Malcom, I'll give it a try and see how things go. I'll do some light sanding and add a third coat of resin. My protruding bubbles are about .3 mm at the highest. Sand, apply more resin, let dry, inject resin into bubbles, sand. Would I need to apply a fourth coat of resin? That would seem alot.
Many thanks from Bremen,Germany
B.Gorr

Messages In This Thread

Outgassing/ Large Bubbles/Cured Epoxy
B.Gorr -- 8/20/2001, 7:27 am
Re: Outgassing/ Large Bubbles/Cured Epoxy
Malcolm Schweizer -- 8/20/2001, 12:05 pm
Re: Outgassing/ Large Bubbles/Cured Epoxy
Nick Schade - Guillemot Kayaks -- 8/20/2001, 9:22 am
Re: Outgassing/ Large Bubbles/Cured Epoxy/Danke!
B.Gorr -- 8/20/2001, 2:31 pm