Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Small cheap plastic cups
By:Ken Sutherland
Date: 8/24/2001, 5:47 pm
In Response To: Small cheap plastic cups (Shawn Baker)

Another hobby of mine is building golfclubs.
Although I usually use syringes to measure epoxy, I have also used these mixing cups. Great for mixing small batches, they are clearly marked in various graduations, after the excess epoxy has cured you can give the cup a squeeze, the hardened epoxy pops out, and you can re-use the cup. At $1.00 for 25, that's a good deal for what probably equates a lifetime supply.

The link below will take you to the search menu.
Type in 'epoxy mixing cups' then CLICK ON CLUBMAKERS CATALOG.
Click on 'express order' for more details on the cups.

Cheers!

Ken

Epoxy mixing cups

Messages In This Thread

Mixing epoxy, weight vs. volume
Al Gunther -- 8/23/2001, 12:20 am
over pouring
mike allen -- 8/28/2001, 8:27 pm
Re: over pouring
Al Gunther -- 8/29/2001, 12:10 am
some more balanced ideas
mike allen ---> -- 8/29/2001, 11:50 am
Epoxy mixing balance
Doug K -- 8/23/2001, 3:11 pm
Re: Epoxy mixing balance
Al Gunther -- 8/24/2001, 10:48 am
Re: Epoxy mixing balance
Doug K -- 8/24/2001, 1:48 pm
Re: Epoxy mixing balance
Al Gunther -- 8/24/2001, 4:10 pm
Re: Epoxy mixing balance
Don Beale -- 8/24/2001, 11:14 am
Re: Epoxy mixing balance
Al Gunther -- 8/24/2001, 12:34 pm
Small cheap plastic cups
Shawn Baker -- 8/24/2001, 12:40 pm
Re: Small cheap plastic cups
Ken Sutherland -- 8/24/2001, 5:47 pm
Re: Small cheap plastic cups
Jim -- 8/27/2001, 8:55 am
Re: Thank You!!!!
Shawn Baker -- 8/24/2001, 6:58 pm
Re:Talk abt cheap
Jim -- 8/24/2001, 12:56 pm
Re:Talk abt cheap
Matthew -- 8/24/2001, 10:07 pm
Re:Talk abt cheap
daren neufeld -- 8/24/2001, 8:28 pm
Re:Easiest Volume Measure
Dave Houser -- 8/24/2001, 5:33 pm
Mixing by weight (well, mass, but...)
Pete Roszyk -- 8/23/2001, 12:18 pm
Re: Mixing by weight (well, mass, but...)
Al Gunther -- 8/24/2001, 10:37 am
Easier method
Severne -- 8/23/2001, 11:17 am