Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

That's probably close enough
By:Shawn Baker
Date: 8/28/2001, 6:28 pm
In Response To: it is working part of the way (sage)

That's about how far out my Guillemot 18 deck was when I joined it to the hull.

Strapping tape alone was enough to keep it fair while the epoxy/glass tape cured.

Shawn

: the deck is just about cured. I have it straped down on some of the forms.
: The fit is not exactly right. Now my over hang is about 1/3 inch on both
: sides. I think that I will leave it like this for a few days then strech
: out the hull some. Thanks for your help!

: Sage.

Messages In This Thread

the deck has flatend!!
sage -- 8/25/2001, 2:07 pm
it is working part of the way
sage -- 8/28/2001, 12:22 pm
That's probably close enough
Shawn Baker -- 8/28/2001, 6:28 pm
Re: the deck has flatend!!
mark stevens -- 8/27/2001, 4:51 pm
All is lost, but I'll take it off your hands!
Shawn Baker -- 8/27/2001, 1:46 pm
Re: the deck has flatend!!
Dale Jeffers -- 8/27/2001, 1:16 pm
Re: the deck has flatend!!
Jay Babina -- 8/27/2001, 10:09 am
Re: the deck has flatend!!
Ken Sutherland -- 8/25/2001, 2:23 pm
she's a striper
sage -- 8/25/2001, 8:50 pm
Re: she's a striper
Ken Sutherland -- 8/26/2001, 9:14 am
Re: Don't sweat it Sage......
Ben Staley -- 8/25/2001, 8:58 pm