Date: 7/1/1998, 6:34 pm
This one is old. It came out of Canada and I understand that they were make there for a while. The mast is steped on top of the deck but the hull looks very simular except that there is a lot more flair to the bow and very flat at the stern. Sure with I knew what it is. Paid $400 with the trailer but no sail rig. Found a rig at a local boat yard for $100. The sail is a little large for the boat but I think it will work out. The mast was 20' long and I cut off 18". Boy am I going to have some fun now!!!! Maby I should think about a little more life insurance!
> The Laser is 14 foot. If you got one, you may have made a good
> deal (if it was cheap). I used to race Lasers as a kid, and sold mine
> a few years back.
Messages In This Thread
- deck re-attach
Jim Loudon -- 6/30/1998, 7:13 pm- Re: deck re-attach - filling the voids
Shawn Baker -- 7/3/1998, 3:56 pm- Re: deck re-attach - filling the voids
Mark Kanzler -- 7/4/1998, 10:22 am
- Re: deck re-attach
Paul Jacobson -- 6/30/1998, 8:06 pm- Re: deck re-attach
Jim Loudon -- 6/30/1998, 9:10 pm- Re: deck re-attach
Paul Jacobson -- 7/4/1998, 1:27 am- Re: deck re-attach fillet materials.
Mark Kanzler -- 7/4/1998, 10:16 am
- Re: deck re-attach
Mark Kanzler -- 7/1/1998, 10:37 am- Re: deck re-attach
Jim Loudon -- 7/1/1998, 3:13 pm- Re: Epoxy vs polyester
Mark Kanzler -- 7/1/1998, 4:10 pm- Re: Epoxy vs polyester
Jim Loudon -- 7/1/1998, 4:44 pm- Re: Laser Sailboat
Mark Kanzler -- 7/1/1998, 5:01 pm- Re: Laser Sailboat
Jim Loudon -- 7/1/1998, 6:34 pm- THE Best book about sailing (Instructional)
Mark Kanzler -- 7/1/1998, 7:50 pm
- THE Best book about sailing (Instructional)
- Re: Laser Sailboat
- Re: Laser Sailboat
- Re: Epoxy vs polyester
- Re: Epoxy vs polyester
- Re: deck re-attach fillet materials.
- Re: deck re-attach
- Re: deck re-attach - filling the voids
- Re: deck re-attach - filling the voids