Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Scorp *Pic*
By:Pete Rudie
Date: 9/14/2001, 9:11 pm
In Response To: Re: Scorp (Chip Sandresky)

: Hi Pete, I think Woodcraft will also sharpen (for $2.99) any tool you bring
: into them. I would only consider it if I had a nasty kink or nick in a
: tricky blade like this.

: Do you have experience with any of the single/double radius planes (i.e.
: Carving Spoon or the 100-1/2 Hollowing Plane)? That's what I've got my eye
: on for fairing the inside of my boat.

Funny you should ask that. I have not, but Joe Greenley had a Woodcraft 129216 (replica of the Stanley 100-1/2, on the right in the pic below) at R2K1 and had lavish praise for it.

Palm Plane and Hollowing Plane

Messages In This Thread

Scorp *Pic*
Pete Rudie -- 9/13/2001, 1:17 pm
Re: Scorp
Mike Boren -- 9/14/2001, 10:56 am
Re: Scorp
Roger Nuffer -- 9/13/2001, 8:05 pm
Re: Scorp *Pic*
Pete Rudie -- 9/14/2001, 11:25 am
Re: Scorp
Bob -- 9/15/2001, 9:35 am
Re: Scorp
Chip Sandresky -- 9/14/2001, 5:27 pm
Re: Scorp
John Schroeder -- 9/15/2001, 1:38 pm
Re: Scorp
Chip Sandresky -- 9/16/2001, 8:19 am
Sharpening
eric schade (shearwater boats) -- 9/16/2001, 8:59 am
Re: Sharpening
KenB -- 9/16/2001, 5:57 pm
Re: Sharpening
Rehd -- 9/16/2001, 6:13 pm
Re: Scorp
Ken Sutherland -- 9/15/2001, 10:29 pm
Re: Scorp *Pic*
Pete Rudie -- 9/14/2001, 9:11 pm
Re: Scorp
Scott Dollmeyer -- 9/13/2001, 8:25 pm
Re: Scorp
Charles Cooper -- 9/13/2001, 11:47 pm