Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

conversion: rabbet to side rabbet
By:mike allen --->
Date: 9/17/2001, 7:02 pm
In Response To: Re: side rabbet plane *Pic* (Chip Sandresky)

: Hi Mick, this is what I'm talking about. It is like a conventional plane but
: the blade crosses the entire width of the sole. Thus, the blade can ride
: flush against each form. It takes about three or four passes to cut a good
: bevel. The soft material is removed very easily...

: I beveled did my feature strips that way and they butt against each other
: very tightly.

hi chip

i guess you could convert the rabbet to a side rabbet by bolting on a little fence thru those two screw or bolt holes in the side of your plane. the fence could have an off set for the strip depth. then the whole thing'd be much easier to guide.
only problem with planing on the forms i guess, is where the strips curve greatly - then it'd cut too deep on a convex and too shallow on a concave because of the long sole length(like near a swooping upturned bow?)
-mick

Messages In This Thread

Georgian Bay
Steve M. -- 9/9/2001, 5:34 pm
Re: Georgian Bay
Andre -- 9/11/2001, 5:44 am
I have learned from this discussion.
John Monfoe -- 9/17/2001, 7:01 am
Re: Decoration
Shawn Baker -- 9/17/2001, 6:28 pm
Re: I have learned from this discussion.
Chip Sandresky -- 9/17/2001, 5:56 pm
side rabbet plane
mike allen ---> -- 9/17/2001, 6:30 pm
Re: side rabbet plane *Pic*
Chip Sandresky -- 9/17/2001, 6:41 pm
Re: side rabbet plane
Scott e. Davis -- 9/18/2001, 1:51 pm
Re: not a side rabbet
Chip Sandresky -- 9/18/2001, 2:27 pm
Re: not a side rabbet
Scott E. Davis -- 9/20/2001, 1:42 pm
Re: not a side rabbet
Chip Sandresky -- 9/20/2001, 2:24 pm
Re: not a side rabbet
Scott e. Davis -- 9/21/2001, 1:34 pm
conversion: rabbet to side rabbet
mike allen ---> -- 9/17/2001, 7:02 pm
Re: conversion: rabbet to side rabbet *Pic*
Chip Sandresky -- 9/17/2001, 7:17 pm
Re: Georgian Bay
Steve M -- 9/11/2001, 11:32 am
Re: Georgian Bay
100GRIT -- 9/11/2001, 5:02 pm
Re: That wasn't called for
Shawn Baker -- 9/11/2001, 6:12 pm
Definitely called for. *NM*
Ray Port Angeles -- 9/13/2001, 1:03 pm
Re: That wasn't called for
100GRIT -- 9/11/2001, 8:34 pm
Re: That wasn't called for
100GRIT -- 9/11/2001, 8:30 pm
Re: Georgian Bay
Shawn Baker -- 9/11/2001, 11:59 am
Re: Georgian Bay
Jim Pace -- 9/10/2001, 7:42 pm
Re: Georgian Bay
Jim Martin -- 9/10/2001, 11:05 am
Re: Georgian Bay
Rob Macks -- 9/10/2001, 8:16 am
Time out!
Pete Rudie -- 9/10/2001, 12:37 pm
Re: Georgian Bay *Pic*
James Neely -- 9/9/2001, 9:08 pm
priorities
Randy Knauff -- 9/10/2001, 1:47 pm